Jakub Dlouhý
Jakub
Dlouhý
Manager Strategic Projects • Discover Airlines • Frankfurt, Germany
Manager Strategic Projects
–
Discover Airlines
–
Frankfurt, Germany
Manager Strategic Projects
–
Discover Airlines
–
Frankfurt, Germany
I solve airline challenges
with a unified view:
I solve airline challenges
with a unified view:
I solve airline challenges
with a unified view:
I solve airline challenges
with a unified view:
Business, Operations, and Engineering
Business, Operations, and Engineering
How I work
How I work
How I work
Endless Curiosity
Hands-on Mindset
Academic Rigor
Endless Curiosity
Hands-on Mindset
Academic Rigor
Endless Curiosity
Hands-on Mindset
Academic Rigor
Current Focus
Current Focus
Current Focus
A350 Entry Into Service
Fleet Decisions
Part-IS Compliance
A350 Entry Into Service
Fleet Decisions
Part-IS Compliance
A350 Entry Into Service
Fleet Decisions
Part-IS Compliance
How I work
Endless Curiosity
Hands-on Mindset
Academic Rigor
Current Focus
A350 Entry Into Service
Fleet Decisions
Part-IS Compliance
My Three Personas
Choose a lens to browse selected work.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business & Management Guy
… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
A350 Entry into Service
Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
Part-IS Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
The Operations Guy
… understands what A-CDM is, why pilots must monitor SIGMETs, and how demanding onboard service can be.
safety management
aircraft performance
emergency response
ground operations
onboard service
Selected Experience
Cabin Crew Immersion
I spent a day in the cabin to understand the job from the inside. Safety briefings, service, in-flight sales, and yes, the less glamorous checks.
Emergency & Irregularity Committee Logkeeping
As logkeeper, I documented critical information, decisions, timelines, and follow-up actions during disruptions at 4Y.
Ground Ops Immersion
I shadowed the check-in and gate teams, observed ramp loading, and explored Altéa DCS. The hands-on moments (including making the gate PA) gave me practical insight and a deeper respect for our frontline colleagues.
A320 Simulator Academic Sessions
At TH Wildau, I maintained the A320 simulator hardware and software and supported academic sessions. We used it to demonstrate cockpit procedures and flight control system fundamentals.
The Business
& Management Guy… understands organizational ambidextrity, how to select a suitable fleet, and how to manage complex projects.
fleet selection
route profitability
project management
traffic flow analysis
DOC analysis
innovation management
business process management
Selected Experience
Part-IS Project Management
As project manager for the A350 entry-into-service at Discover Airlines, I oversee tasks, timelines, risks, dependencies and stakeholder reviews across departments.
A350 Entry into Service
Project Management
Contributing to the Part-IS implementation at Discover Airlines as project manager, I coordinate cross-functional work of the affected departments to meet EASA and LBA requirements.
IATA DDS Market
and Traffic Analysis
Using IATA DDS total market estimates, I analyzed historical passenger demand (O&D) to support strategic decisions at Discover Airlines.
Fleet Selection Framework Development
To support fleet selection decisions at Discover Airlines, I developed a combining DOC estimates, fuel-burn modeling and quantified market potential.
The Technical Guy
… understands what a phugoid is, how a flight control system works, and how to work with CAD tools.
flight mechanics
trajectory tracking
additive manufacturing
wind tunnel testing
CAD
laser cutting
simulation
Selected Experience
Trajectory Tracking Controller Design
As a part of my master’s thesis at Airbus, I designed, implemented, and verified a trajectory tracking controller for the ADMIRE aircraft using the MATLAB & Simulink environment.
Additive Manufacturing Workshops
At the ViNN:Lab Makerspace, I helped users and ran workshops on modern manufacturing, including 3D printing (FDM, SLA) and laser cutting.
Flight Visualization Gimbal Development
At Airbus Defence and Space, I developed the pitch axis of a flight-visualization gimbal with CATIA V5, 3D-printed parts, and Arduino motor control over CAN bus.
Wind Tunnel Experiment Design
For my bachelor's thesis, I designed and 3D-printed a wind tunnel model and set up a teaching experiment to illustrate the principles of longitudinal stability.
Experience
Manager Strategic Projects
Discover Airlines, Lufthansa Group
since 2024
full-time
Master's Thesis
in Flight Control
Airbus Defence and Space
2023 – 2024
Graduate Intern
Flight Dynamics
Airbus Defence and Space
2023
full-time
A320 Simulator Administrator
Avionics Lab,
TH Wildau
2020 – 2022
part-time
Research Assistant
ViNN:Lab Makerspace
2019 – 2022
part-time
Manager Strategic Projects
Discover Airlines, Lufthansa Group
since 2024
full-time
Master's Thesis
in Flight Control
Airbus Defence and Space
2023 – 2024
Graduate Intern
Flight Dynamics
Airbus Defence and Space
2023
full-time
A320 Simulator Administrator
Avionics Lab,
TH Wildau
2020 – 2022
part-time
Research Assistant
ViNN:Lab Makerspace
2019 – 2022
part-time
Manager Strategic Projects
Discover Airlines, Lufthansa Group
since 2024
full-time
Master's Thesis
in Flight Control
Airbus Defence and Space
2023 – 2024
Graduate Intern
Flight Dynamics
Airbus Defence and Space
2023
full-time
A320 Simulator Administrator
Avionics Lab,
TH Wildau
2020 – 2022
part-time
Research Assistant
ViNN:Lab Makerspace
2019 – 2022
part-time
Manager Strategic Projects
Discover Airlines, Lufthansa Group
since 2024
full-time
Master's Thesis
in Flight Control
Airbus Defence and Space
2023 – 2024
Graduate Intern
Flight Dynamics
Airbus Defence and Space
2023
full-time
A320 Simulator Administrator
Avionics Lab,
TH Wildau
2020 – 2022
part-time
Research Assistant
ViNN:Lab Makerspace
2019 – 2022
part-time
Qualification
Aviation Engineering
and Management
Master of Engineering
2021 – 2024
Aviation Safety Management Systems
Professional Training, ERAU
Nov 2025
IATA
Project Management
Advanced
Professional Training,
IATA Training
Jun 2025
Innovation Trail
Professional Training, Lufthansa Innovation Hub
Oct 2025
Aviation Engineering
and Logistics
Bachelor of Engineering
2018 – 2021
Aviation Engineering
and Management
Master of Engineering
2021 – 2024
Aviation Safety Management Systems
Professional Training, ERAU
Nov 2025
IATA
Project Management
Advanced
Professional Training,
IATA Training
Jun 2025
Innovation Trail
Professional Training, Lufthansa Innovation Hub
Oct 2025
Aviation Engineering
and Logistics
Bachelor of Engineering
2018 – 2021
Aviation Engineering
and Management
Master of Engineering
2021 – 2024
Aviation Safety Management Systems
Professional Training, ERAU
Nov 2025
IATA
Project Management
Advanced
Professional Training,
IATA Training
Jun 2025
Innovation Trail
Professional Training, Lufthansa Innovation Hub
Oct 2025
Aviation Engineering
and Logistics
Bachelor of Engineering
2018 – 2021
Aviation Engineering
and Management
Master of Engineering
2021 – 2024
Aviation Safety Management Systems
Professional Training, ERAU
Nov 2025
IATA
Project Management
Advanced
Professional Training,
IATA Training
Jun 2025
Innovation Trail
Professional Training, Lufthansa Innovation Hub
Oct 2025
Aviation Engineering
and Logistics
Bachelor of Engineering
2018 – 2021
Jakub Dlouhý
2025